link to JAPANESE

Observing System

[ Main Specifications of AMSR2 ]

  • Deployable main reflector system with 2.0m diameter (1.6m for AMSR-E).
  • Frequency channel set is identical to that of AMSR-E except 7.3GHz channel for RFI mitigation.
  • Two-point external calibration with improved HTS (hot-load).
  • Deep space calibration maneuver to check consistency between main reflector and CSM.
  • Deep space calibration maneuver to check consistency between main reflector and CSM.
  • Add a redundant momentum wheel to increase reliability.

Main Specifications of AMSR2

GCOM-W/Main Specifications of AMSR2
Scan and rate Conical scan at 40 rpm
Antenna Offset parabola with 2.0m dia.
Swath width 1450km
Incidence angle Nominal 55 degrees
Digitization 12bits
Dynamic range 2.7-340K
Polarization Vertical and horizontal
AMSR2 Channel Set
Center Freq. Band width Pol. Beam width Ground res. Sampling
interval
GHz MHz   degree km km
6.925/7.3 350 V/H 1.8 35 x 62 10
10.65 100 1.2 24 x 42
18.7 200 0.65 14 x 22
23.8 400 0.75 15 x 26
36.5 1000 0.35 7 x 12
89.0 3000 0.15 3 x 5 5


JAXA logo Earth Observation Research Center,
Japan Aerospace Exploration Agency
Copyright© JAXA EORC All rights reserved.